Two Fabric Families, Two Flow Regimes
Elastic cloth wants to be carried gently, with very little pulling. High-density and microfiber cloth needs enough liquor force to wet out and penetrate. Those requirements pull in opposite directions, and they are the usual reason a dyehouse keeps two machines and loses a shift to changeover. The PFB dual nozzle energy saving dyeing machine design covers both in one vessel, and the water and steam saving follows partly from not running that second machine.






Nozzle Selection
|
Nozzle |
Pressure |
Fabric suited |
Watch for |
|
Overflow nozzle |
0.5 - 1.0 kg/cm² |
Elastic and other low-tension fabrics |
Too little force on dense cloth |
|
Jet nozzle |
up to 3 kg/cm² |
High-density and microfiber fabrics |
Surface stress on delicate cloth |
|
Dual anti-rotation device |
Fitted to the nozzles |
All fabrics |
Cloth twisting in the liquor stream |
Elastic Fabric Programme
At 0.5-1.0 kg/cm² the overflow nozzle transports the cloth by liquor volume, which is the band BOSEN specifies for elastic fabrics and for any construction needing low spray pressure at low tension. Tension is the variable to hold: an elastic fabric that is pulled will come out longer than it went in, and no amount of levelness will hide that.
Keep nozzle pressure at the bottom of the band and let circulation do the work.
Run both anti-rotation devices to stop the rope from twisting.
Check width and length against the greige roll before and after the trial.
Microfiber Programme
Switching to the jet nozzle opens up to 3 kg/cm², enough to drive liquor into high-density and microfiber constructions that resist wetting at lower pressure. The point of the higher figure is penetration, not speed: microfiber will run fast and still dye unevenly if the liquor never reaches the core of the yarn.
What Changes In The Recipe
|
Setting |
Elastic / low tension |
Microfiber / high density |
|
Nozzle |
Overflow |
Jet |
|
Pressure band |
0.5 - 1.0 kg/cm² |
up to 3 kg/cm² |
|
Transport principle |
Low tension, liquor carried |
Liquor force driven |
|
Liquor ratio |
1:5 - 1:6 |
1:5 - 1:6 |
|
Main watch point |
Crease marks and surface |
Wetting-out and penetration |
The ratio does not change between the two programmes, which is what allows a single bath specification to be reused and a single set of utility figures to be planned.
One Machine Instead Of Two
Two machines mean two warm-up cycles, two cleaning cycles and two standing losses even when only one is producing. Consolidating the two fabric families onto one platform removes the idle machine from the utility bill, and it removes the batch queue that builds up whenever the other machine is occupied.
Where To Find Dimensions And Circuit Detail
Pressure figures and nozzle behaviour are taken from the PFB product literature. Frame dimensions, pump ratings and the full model table are on the sloped chamber page; the dual-tank circuit and its effect on cycle time are on the cloth storage tank page.






Hot Tags: dual nozzle energy saving dyeing machine, China dual nozzle energy saving dyeing machine manufacturers, suppliers











