Throughput in a Gentle Slope Chamber Dyeing Equipment is set by how quickly the cloth can complete a circuit, not by how hard the pump runs. Pushing more liquor through a long circuit only raises the pressure the cloth has to survive. The PFB answers the same problem with geometry: a gentle slope, one 1108 mm cylinder, and two cloth storage tanks inside it.






Inside The 1108 mm Cylinder
Single cylinder, 1108 mm diameter, so the pressure shell is one vessel rather than two.
Two built-in cloth storage tanks in that one shell.
Dual nozzles, one feeding each tank.
Load per chamber rises without adding a second vessel or a second set of pipework.
One Circuit, Measured
|
Stage |
What happens |
Why it matters |
|
Cloth leaves the nozzle |
It enters the tank at liquor speed |
Short entry path, so the cloth folds less on arrival |
|
Cloth settles on the slope |
It is stored on the incline, not in a deep column |
Low head pressure on the stack |
|
Cloth is re-fed |
The second tank and second nozzle pick it up |
Two tanks alternate, so each circuit is short |
|
Liquor returns to the bath |
It circulates back through the heat exchanger |
More circulation cycles per unit of time |
Loading And Unloading Sequence
The arrangement is usually judged on the batch change rather than on the dyeing itself, because that is where the idle time sits.
Fast loading
Cloth enters through both nozzles at once.
Fast dyeing
The shortened circuit lets liquor meet the cloth more often per unit time.
Fast bidirectional unloading
Cloth leaves through both ends instead of one.
Less time between batches,
which is capacity a dyehouse gets without buying another machine.
Capacity Per Chamber
|
Model |
Chambers |
Capacity per chamber |
Tank and nozzle arrangement |
|
PFB-1 |
1 |
300 - 500 kg |
Dual tank, dual nozzle in one shell |
|
PFB-2 |
2 |
600 - 1000 kg |
Dual tank, dual nozzle per chamber |
|
PFB-4 |
4 |
1200 - 2000 kg |
Dual tank, dual nozzle per chamber |
Why Level Dyeing Improves
A shorter circuit and a higher liquor circulation frequency mean the cloth meets fresh liquor more often in the same period of time. Levelness comes from that exchange rate rather than from nozzle pressure, which is also why the same shell can be run gently on elastic cloth without losing shade consistency on the batch.
Where To Find Geometry And Frame Data
Chamber geometry and the fabric range that follows from it are set out on the sloped chamber page. Nozzle pressure selection by fabric family is on the dual nozzle page. Frame dimensions and pump ratings sit in the model table on the sloped chamber page.






Hot Tags: gentle slope chamber dyeing equipment, China gentle slope chamber dyeing equipment manufacturers, suppliers











