I. Daily Maintenance
1. Cleaning the Equipment: After each use, disconnect the power, remove the nozzles and clean them with a soft brush and cleaning agent. Circulate and flush the piping, then dry the exterior.
2. Checking Connections: Check the spray guns and piping for tightness daily. Lubricate moving parts and replace filters.
3. Environmental Management: Keep ventilation openings clean to prevent dust accumulation from affecting heat dissipation.
II. Regular Maintenance
1. Weekly Inspection: Clean the filters and fan. Check the motor oil; add or replace as needed.
2. Monthly Inspection: Calibrate the spray pressure, angle, and speed to ensure accurate results.
3. Quarterly Inspection: Check the nozzle flow rate and spray angle to ensure they meet standards.
III. Maintenance of Key Components
1. Nozzles: Clean regularly with a fine needle or ultrasonic cleaner to prevent clogging.
2. Heating System: Check the heating elements and thermostat to prevent temperature fluctuations.
3. Transmission System: Check the belt and chain tension and adjust as needed.
IV. Safety and Operation
1. Safety First: Ensure proper grounding before operation; wear protective gloves when operating at high temperatures.
2. Standard Operation: Operate according to the manual; avoid operation beyond temperature, pressure, or load limits.
